You are here

Punching Tool

PO50

The Dubuis PO50 is designed for punching switch cupboards and switch boxes, as well as punching all types of sheet plates (simple use, quick operation and clean work without burrs). 

According to the cutting diameter and type of punch/die to use, PO50 will be used either with a 3/8 draw stud, Ø 9.5 mm and length 67 mm, ptnb. 30199 (a reduction sleeve (ptnb. 30155) and a reduction ring (ptnb. 30129) must be fitted with this 3/8 draw stud), or with a 3/4 draw stud of Ø 19 mm and length 137 mm, ptnb. 30198

Features: 
  • Automatic release with an audible "click" in case of surcharge
  • Return of piston by pressing the release trigger
  • High performance in a compact design
Specifications
ModelPart #WeightLengthWidthHeightForceStroke
PO50309042.7 kg350 mm130 mm55 mm50 kN21 mm
Accessories
Part #Description
30216PO50 wrench
30172VMetal carrying case CI50 + ES51 + PO50
30923Control gauge for PO50 + carrying case
HGREPOIN15.2Punch PO50 / 15,2mm for Draw stud 3/8
HGREPOIN16.2Punch PO50 / 16,2mm for Draw stud 3/8
HGREPOIN17.5Punch PO50 / 17,5mm for Draw stud 3/8
HGREPOIN18.6Punch PO50 / 18,6mm for Draw stud 3/8
HGREPOIN19.1Punch PO50 / 19,1mm for Draw stud 3/8
HGREPOIN20.4Punch PO50 / 20,4mm for Draw stud 3/8
HGREPOIN20.6Punch PO50 / 20,6mm for Draw stud 3/8
HGREPOIN22.5Punch PO50 / 22,5mm for Draw stud 3/8
HGREPOIN23.8Punch PO50 / 23,8mm for Draw stud 3/8
HGREPOIN25.4Punch PO50 / 25,4mm for Draw stud 3/8
HGREPOIN27Punch PO50 / 27,0mm for Draw stud 3/8
HGREPOIN28.3Punch PO50 / 28,3mm for Draw stud 3/8
HGREPOIN28.6Punch PO50 / 28,6mm for Draw stud 3/8
HGREPOIN30.5Punch PO50 / 30,5mm for Draw stud 3/8
HGREPOIN31.8Punch PO50 / 31,8mm for Draw stud 3/8
HGREPOIN32.5Punch PO50 / 32,5mm for Draw stud 3/4
HGREPOIN33.4Punch PO50 / 33,4mm for Draw stud 3/8
HGREPOIN34.6Punch PO50 / 34,6mm for Draw stud 3/4
HGREPOIN37Punch PO50 / 37,0mm for Draw stud 3/4
HGREPOIN38.1Punch PO50 / 38,1mm for Draw stud 3/4
HGREPOIN40.5Punch PO50 / 40,5mm for Draw stud 3/4
HGREPOIN41.3Punch PO50 / 41,3mm for Draw stud 3/4
HGREPOIN43.2Punch PO50 / 43,2mm for Draw stud 3/4
HGREPOIN44.5Punch PO50 / 44,5mm for Draw stud 3/4
HGREPOIN47Punch PO50 / 47,0mm for Draw stud 3/4
HGREPOIN47.6Punch PO50 / 47,6mm for Draw stud 3/4
HGREPOIN49.6Punch PO50 / 49,6mm for Draw stud 3/4
HGREPOIN50.8Punch PO50 / 50,8mm for Draw stud 3/4
HGREPOIN54Punch PO50 / 54,0mm for Draw stud 3/4
HGREPOIN55Punch PO50 / 55,0mm for Draw stud 3/4
HGREPOIN57.2Punch PO50 / 57,2mm for Draw stud 3/4
HGREPOIN58Punch PO50 / 58,0mm for Draw stud 3/4
HGREPOIN60Punch PO50 / 60,0mm for Draw stud 3/4
HGREPOIN61.5Punch PO50 / 61,5mm for Draw stud 3/4
HGREPOIN63.5Punch PO50 / 63,5mm for Draw stud 3/4
HGREPOIN66.7Punch PO50 / 66,7mm for Draw stud 3/4
HGREPOIN68Punch PO50 / 68,0mm for Draw stud 3/4
HGREPOIN61.5Punch PO50 / 61,5mm for Draw stud 3/4
HGREPOIN63.5Punch PO50 / 63,5mm for Draw stud 3/4
HGREPOIN66.7Punch PO50 / 66,7mm for Draw stud 3/4
HGREPOIN68Punch PO50 / 68,0mm for Draw stud 3/4
HGREPOIN69.9Punch PO50 / 69,9mm for Draw stud 3/4
HGREPOIN70.6Punch PO50 / 70,6mm for Draw stud 3/4
HGREPOIN74Punch PO50 / 74,0mm for Draw stud 3/4
HGREPOIN76.2Punch PO50 / 76,2mm for Draw stud 3/4
HGREPOIN79.4Punch PO50 / 79,4mm for Draw stud 3/4
HGREPOIN82Punch PO50 / 82,0mm for Draw stud 3/4
HGREPOIN85.5Punch PO50 / 85,5mm for Draw stud 3/4
HGREPOIN89.8Punch PO50 / 89,8mm for Draw stud 3/4
HGREPOIN92Punch PO50 / 92,0mm for Draw stud 3/4
HGREPOIN95.3Punch PO50 / 95,3mm for Draw stud 3/4
HGREPOIN96Punch PO50 / 96,0mm for Draw stud 3/4
HGREMATR15.2Die PO50 / 15,2mm for Draw stud 3/8
HGREMATR16.2Die PO50 / 16,2mm for Draw stud 3/8
HGREMATR17.5Die PO50 / 17,5mm for Draw stud 3/8
HGREMATR18.6Die PO50 / 18,6mm for Draw stud 3/8
HGREMATR19.1Die PO50 / 19,1mm for Draw stud 3/8
HGREMATR20.4Die PO50 / 20,4mm for Draw stud 3/8
HGREMATR20.6Die PO50 / 20,6mm for Draw stud 3/8
HGREMATR22.5Die PO50 / 22,5mm for Draw stud 3/8
HGREMATR23.8Die PO50 / 23,8mm for Draw stud 3/8
HGREMATR25.4Die PO50 / 25,4mm for Draw stud 3/8
HGREMATR27Die PO50 / 27,0mm for Draw stud 3/8
HGREMATR28.3Die PO50 / 28,3mm for Draw stud 3/8
HGREMATR28.6Die PO50 / 28,6mm for Draw stud 3/8
HGREMATR30.5Die PO50 / 30,5mm for Draw stud 3/8
HGREMATR31.8Die PO50 / 31,8mm for Draw stud 3/8
HGREMATR32.5Die PO50 / 32,5mm for Draw stud 3/4
HGREMATR33.4Die PO50 / 33,4mm for Draw stud 3/8
HGREMATR34.6Die PO50 / 34,6mm for Draw stud 3/4
HGREMATR37Die PO50 / 37,0mm for Draw stud 3/4
HGREMATR38.1Die PO50 / 38,1mm for Draw stud 3/4
HGREMATR40.5Die PO50 / 40,5mm for Draw stud 3/4
HGREMATR41.3Die PO50 / 41,3mm for Draw stud 3/4
HGREMATR43.2Die PO50 / 43,2mm for Draw stud 3/4
HGREMATR44.5Die PO50 / 44,5mm for Draw stud 3/4
HGREMATR47Die PO50 / 47,0mm for Draw stud 3/4
HGREMATR47.6Die PO50 / 47,6mm for Draw stud 3/4
HGREMATR49.6Die PO50 / 49,6mm for Draw stud 3/4
HGREMATR50.8Die PO50 / 50,8mm for Draw stud 3/4
HGREMATR54Die PO50 / 54,0mm for Draw stud 3/4
HGREMATR55Die PO50 / 55,0mm for Draw stud 3/4
HGREMATR57.2Die PO50 / 57,2mm for Draw stud 3/4
HGREMATR58Die PO50 / 58,0mm for Draw stud 3/4
HGREMATR60Die PO50 / 60,0mm for Draw stud 3/4
HGREMATR61.5Die PO50 / 61,5mm for Draw stud 3/4
HGREMATR63.5Die PO50 / 63,5mm for Draw stud 3/4
HGREMATR66.7Die PO50 / 66,7mm for Draw stud 3/4
HGREMATR68Die PO50 / 68,0mm for Draw stud 3/4
HGREMATR61.5Die PO50 / 61,5mm for Draw stud 3/4
HGREMATR63.5Die PO50 / 63,5mm for Draw stud 3/4
HGREMATR66.7Die PO50 / 66,7mm for Draw stud 3/4
HGREMATR68Die PO50 / 68,0mm for Draw stud 3/4
HGREMATR69.9Die PO50 / 69,9mm for Draw stud 3/4
HGREMATR70.6Die PO50 / 70,6mm for Draw stud 3/4
HGREMATR74Die PO50 / 74,0mm for Draw stud 3/4
HGREMATR76.2Die PO50 / 76,2mm for Draw stud 3/4
HGREMATR79.4Die PO50 / 79,4mm for Draw stud 3/4
HGREMATR82Die PO50 / 82,0mm for Draw stud 3/4
HGREMATR85.5Die PO50 / 85,5mm for Draw stud 3/4
HGREMATR89.8Die PO50 / 89,8mm for Draw stud 3/4
HGREMATR92Die PO50 / 92,0mm for Draw stud 3/4
HGREMATR95.3Die PO50 / 95,3mm for Draw stud 3/4
HGREMATR96Die PO50 / 96,0mm for Draw stud 3/4
30199Draw stud PO50 / 3/8
30198Draw stud PO50 / 3/4